There were three independent reasons a fresh build produced an image that
OVMF would not boot. All three are fixed here; verified by booting the
resulting ISO/deshab-dev.img under QEMU/OVMF through to FirstInit.
1. ESP rejected by OVMF (CODE/linux/pack_system_image.sh)
The vfat formatter was invoked with an explicit -s 8, forcing 4KiB clusters.
On the 256MiB ESP that yields exactly 65535 clusters - the FAT32 0xFFF5
boundary - and OVMF's FatPkg refuses to mount the volume. Symptom: BdsDxe
logs "failed to load ... Not Found", the ESP shows up as BLKn with no FS in
the UEFI Shell, and the firmware falls through to the internal shell.
The sidecar FAT32 image (make_sata_sidecar.sh) mounts fine because it calls
the formatter without -s. Drop -s here too and let the tool pick geometry.
Do NOT add -f 1: OVMF mounts nfat=1 and nfat=2 alike, it was not the cause.
2. Limine dropped into a panic (CODE/linux/pack_system_image.sh)
limine.conf declares the Linux-compat guest modules. build.sh uncomments
them once Linux has been built, but nothing ever comments them back, so the
file says "load boot():/boot/linux-initrd.img" while only linux-bzImage
exists on disk - Limine panics on the missing module and never reaches the
kernel. Filter the guest module_path lines against SYSTEM/boot/ at pack
time and write the result to the ESP. Both the root /limine.conf and
/limine/limine.conf are written, since Limine 10 prefers the latter. The
tracked source file is left untouched.
3. Nine drivers were never compiled (build.ps1)
Commit 055c521 untracked the .drv binaries on the grounds that they are
regenerable, but build.ps1 only ever invoked Build-DkmDriver for 8 of the
17 drivers listed in manifest.json. timer/acpi/pci/ahci/bootfs/vfs/fat32/
devfs/ps2kbd had sources under CODE/DKM/ and no build step, so the image
shipped without them and Limine failed on the first one. Add the missing
compile steps, grouped by load stage. All 17 now match manifest.json.
Also in this commit (environment/tooling hygiene):
- check_env.sh: stop hardcoding /mnt/d/Code/Deshab (the original author's
machine); derive the repo root from the script's own location. It was
reporting a bogus "wsl_mount" failure on every other checkout and sending
people to install packages that were already present. Also check and
advertise the image-packing tools (dosfstools/e2fsprogs/fdisk/rsync), which
were missing from the dependency list even though pack_system_image.sh
hard-requires them.
- build_initrd.sh: same hardcoded-path fix.
- README.md: relative path instead of the stale absolute one.
Verified: ./build.bat -Variant dev under WSL2/Ubuntu, then QEMU/OVMF boots
through BdsDxe -> Limine -> UTSM -> DKM (17/17) -> DSK -> FirstInit, with the
PS/2 mouse initialising cleanly.
stale-check compared LastWriteTime against a stamp file that does not
exist yet on the first build, so Get-Item threw PathNotFound and aborted
the build before make DSK.
- build.ps1: guard the texSrc/texStamp mtime comparison with
Test-Path $TexStamp; $needTex is already $true when the stamp is
absent, so the comparison is only meaningful when both files exist
- .gitignore: ignore IDEA.md local scratch note
Verified: .\build.bat now reaches gen_textures.py and emits
back.rgba / startMenuLogo.rgba / bootlogo.rgba into
SYSTEM/system/deshab64/desktop/textures/.
- desktop boot screen: typewriter effect removed, whole screen drawn in one pass
- login: ohMyLogo (DEAICUP lotus, 288px embedded) intro screen before password card
- strict error policy instrumentation (zero degradation): login LOGIN-E01..E05 (integrity/badctx/noconf/nouser/nohash) and desktop DSK-E01 now full-screen fatal with symbol + halt instead of silent skip
- root-cause fixed: missing .build_tmp/mkfat32.ps1 silently left SATA sidecar stale (login.elf 'not found' degradation) - replaced with CODE/linux/make_sata_sidecar.sh (auto adaptive FAT32 rebuild each build)
- recreated lost CODE/login/patch_login_hash.ps1 (.text SHA256 -> .hashseg)
- dev config now full flow: show_logo=1, wizard+login enabled, dev shell off
- panic screen now draws embedded ohMyLogo.png (384px RGBA, gen_panic_logo.py); background color sampled from image corners so screen bg matches logo bg
- F2: include/utsm/fbcon.h unified framebuffer console (pixel/blend/fill/rgba-image/text with FBCON_HAVE_FONT opt-in); panic.c migrated onto it
- build.ps1 regenerates panic_logo_data.inc when ohMyLogo.png changes
Add the current OS source tree, build scripts, system image layout, and development notes covering DMA page allocation, e1000 bring-up, net API dispatch, and DHCP work in progress.
boonxiong2