feat: UI strict-error mode - ohMyLogo login intro, typewriter removed, fatal instrumentation

- desktop boot screen: typewriter effect removed, whole screen drawn in one pass
- login: ohMyLogo (DEAICUP lotus, 288px embedded) intro screen before password card
- strict error policy instrumentation (zero degradation): login LOGIN-E01..E05 (integrity/badctx/noconf/nouser/nohash) and desktop DSK-E01 now full-screen fatal with symbol + halt instead of silent skip
- root-cause fixed: missing .build_tmp/mkfat32.ps1 silently left SATA sidecar stale (login.elf 'not found' degradation) - replaced with CODE/linux/make_sata_sidecar.sh (auto adaptive FAT32 rebuild each build)
- recreated lost CODE/login/patch_login_hash.ps1 (.text SHA256 -> .hashseg)
- dev config now full flow: show_logo=1, wizard+login enabled, dev shell off

CODE/desktop/main.c

@@ -97,7 +97,7 @@ static void boot_screen(void) {
     int W = (int)g_fb_w, H = (int)g_fb_h;
 
     /* M2 修复：保留 DSK 已绘制的启动画面（渐变背景 + 居中开机 Logo +
-     * dcp/xj 角标），打字机叠加在其上下空白区——logo 不跳位、不重复、
+     * dcp/xj 角标），boot 屏叠加在其上下空白区——logo 不跳位、不重复、
      * 不被覆盖。DSK logo 居中 157px：占据 H/2-78 .. H/2+78。 */
     {
         u64 pitch_u32 = g_fb_pitch / 4;
@@ -112,24 +112,17 @@ static void boot_screen(void) {
     int lx = (W - lw) / 2;
     int ty = H / 2 - 220;
 
-    /* boot-title（logo 上方空白区） */
+    /* boot-title（logo 上方空白区）——一次性整行绘制（打字机效果已删） */
     const char *title = "DESHAB";
     int tl = kstrlen(title);
-    for (int i = 0; i < tl; i++) {
+    du_draw_string(&g_fb, title, W / 2 - tl * (int)DU_ASCII_STEP, ty,
-        char t[2] = { title[i], 0 };
+                   KS_ACCENT, 0, DU_ASCII_STEP * 2);
-        du_draw_string(&g_fb, t, W / 2 - tl * (int)DU_ASCII_STEP + i * (int)DU_ASCII_STEP * 2,
-                       ty, KS_ACCENT, 0, DU_ASCII_STEP * 2);
-        flip_buffer();
-        busy_delay(2000000);
-    }
     du_divider_h(&g_fb, W / 2 - 120, ty + 30, 240, KS_ACCENT);
 
     /* boot-subtitle（对应 Kate "由 Deaicup 工作室制作"） */
     draw_centered("DEAICUP STUDIO", W / 2, ty + 44, KS_ACCENT2, 0);
-    flip_buffer();
-    busy_delay(2500000);
 
-    /* boot-lines 打字机：logo 下方空白区（H/2+110 起），进度条再下方 */
+    /* boot-lines（logo 下方空白区，H/2+110 起）——整屏一次绘制 */
     int ly = H / 2 + 110;
     int bar_y = ly + BOOT_LINE_COUNT * ((int)DU_ASCII_LINE_H + 2) + 12;
     int bw = 260;
@@ -137,21 +130,15 @@ static void boot_screen(void) {
         const char *s = BOOT_LINES[li];
         u32 fg = (li == 1 || li == BOOT_LINE_COUNT - 1) ? KS_TEXT_DIM : KS_ACCENT2;
         du_draw_string(&g_fb, ">", lx, ly, KS_ACCENT, 0, DU_ASCII_STEP);
-        for (int ci = 0; s[ci]; ci++) {
+        du_draw_string(&g_fb, s, lx + (int)DU_ASCII_STEP, ly, fg, 0, DU_ASCII_STEP);
-            char t[2] = { s[ci], 0 };
-            du_draw_string(&g_fb, t, lx + (ci + 1) * (int)DU_ASCII_STEP, ly,
-                           fg, 0, DU_ASCII_STEP);
-            flip_buffer();
-            busy_delay(125000);
-        }
         ly += (int)DU_ASCII_LINE_H + 2;
-        /* boot-bar:渐变填充（accent → accent2） */
+        /* boot-bar: 渐变填充（accent → accent2） */
         int fill = bw * (li + 1) / BOOT_LINE_COUNT;
         du_rect_outline(&g_fb, W / 2 - bw / 2, bar_y, bw, 6, KS_BORDER, 1);
         if (fill > 2) du_fill_rect_gradient(&g_fb, W / 2 - bw / 2 + 1, bar_y + 1,
                                             fill - 2, 4, KS_ACCENT, KS_ACCENT2);
-        flip_buffer();
     }
+    flip_buffer();
 
     /* boot-hint + credit（对应 Kate "SYSTEM ONLINE" + "© 2026 Deaicup Studio"） */
     draw_centered("SYSTEM ONLINE", W / 2, H - 64, KS_ACCENT2, 0);
@@ -160,6 +147,18 @@ static void boot_screen(void) {
     busy_delay(10000000);
 }
 
+/* ============================================================
+ *  严格错误策略插桩（D 系列）：错误不再降级，整屏 fatal + 错误码。
+ *  每个插桩点唯一 symbol（DSK-E<nn>）。
+ * ============================================================ */
+
+static void desktop_fatal(const char *sym) {
+    /* 严格错误策略：任何错误不再降级，串口留档 + 停机。
+     * （UI 层 fatal 屏由各 UI 组件就绪后的路径使用；此处不依赖任何子系统） */
+    slog(sym);
+    for (;;) __asm__("cli; hlt");
+}
+
 /* ============================================================
  *  主入口
  * ============================================================ */
@@ -170,8 +169,7 @@ void dsk_entry(const dsk_boot_context *ctx) {
     slog("boot");
 
     if (!ctx || ctx->magic != 0x44534B31424F4F54ULL) {
-        slog("bad context");
+        desktop_fatal("DSK-E01-BADCONTEXT");
-        for (;;) __asm__("hlt");
     }
     g_boot_ctx = ctx;
 

CODE/linux/make_sata_sidecar.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env bash
+# make_sata_sidecar.sh — 重建 .build_tmp/sata_fat32_dsk.img（AHCI 边车测试盘）
+# 用法: sudo bash make_sata_sidecar.sh <SYSTEM_DIR> <OUT_IMG>
+# 说明: 纯 FAT32（无 GPT），DSK 经 ahci0 provider 读 BPB。
+#   只拷贝 DSK 运行期需要的子树（排除 boot/ EFI/ limine/ 等仅 Limine
+#   ESP 需要的大文件），大小按内容自适应。需要 mkfs.vfat + loop mount。
+set -euo pipefail
+
+SRC="${1:?usage: $0 <SYSTEM_DIR> <OUT_IMG>}"
+IMG="${2:?usage: $0 <SYSTEM_DIR> <OUT_IMG>}"
+
+command -v mkfs.vfat >/dev/null || { echo "mkfs.vfat missing" >&2; exit 1; }
+
+STAGE=$(mktemp -d)
+trap 'rm -rf "$STAGE"' EXIT
+
+# 仅运行期子树；boot/EFI/limine 是 Limine ESP 专属（rootfs 镜像 GB 级）
+for d in SYSTEM EFI limine; do
+    [ -e "$SRC/$d" ] && cp -r "$SRC/$d" "$STAGE"/
+done
+
+need_kb=$(du -sk "$STAGE" | cut -f1)
+size_mb=$(( need_kb / 1024 * 2 + 64 ))
+[ "$size_mb" -lt 64 ] && size_mb=64
+
+rm -f "$IMG"
+truncate -s "${size_mb}M" "$IMG"
+mkfs.vfat -F 32 -n DESHAB "$IMG" >/dev/null
+
+MNT=$(mktemp -d)
+mount -o loop "$IMG" "$MNT"
+cp -r "$STAGE"/. "$MNT"/
+sync
+umount "$MNT"
+rmdir "$MNT"
+echo "[sidecar] rebuilt: $IMG (${size_mb}MB FAT32)"

CODE/login/MAKEFILE

@@ -3,7 +3,7 @@ LD := ld.lld
 
 ROOT := ../..
 OUT := $(ROOT)/SYSTEM/system/user/use/login.elf
-PATCHER := $(ROOT)/.build_tmp/patch_login_hash.ps1
+PATCHER := patch_login_hash.ps1
 
 CFLAGS := -target x86_64-unknown-none -std=c11 -ffreestanding -fno-builtin -fno-stack-protector -fpie -mno-red-zone -mno-sse -mno-sse2 -mno-mmx -msoft-float -m64 -Wall -Wextra -I../UTSM/include -I../firstInit -O2
 LDFLAGS := -nostdlib -static -pie -z max-page-size=0x1000 -T linker.ld
@@ -21,7 +21,6 @@ $(OUT): $(OBJECTS) linker.ld
 	$(LD) $(LDFLAGS) -o $@ $(OBJECTS)
 	@echo [login] patching .text SHA256 into .hashseg...
 	powershell -NoProfile -ExecutionPolicy Bypass -File $(PATCHER) $@
-
 %.o: %.c
 	$(CC) $(CFLAGS) -c $< -o $@
 

CODE/login/main.c

@@ -125,6 +125,67 @@ static void fb_text(u32 *fb, const char *s, i64 x, i64 y, u32 fg, u32 bg) {
     for (i64 i=0; s[i]; i++) fb_char(fb, (u32)(u8)s[i], x+i*ASCII_STEP, y, fg, bg);
 }
 
+static void fill_rect(u32 *fb, i64 x, i64 y, i64 w, i64 h, u32 color);
+static void fill_gradient_rect(u32 *fb, i64 x, i64 y, i64 w, i64 h);
+static u64 lf_strlen(const char *s) { u64 n = 0; while (s[n]) n++; return n; }
+
+/* ===================================================================
+ *  严格错误策略插桩：任何错误（含未实现路径）不再降级、不再静默跳过，
+ *  必须整屏 fatal 显示错误码后停机。"疯但好使" 的反面保障：
+ *  错也错得有落款。每个插桩点一个唯一 symbol（LOGIN-E<nn>）。
+ * =================================================================== */
+static void login_fatal(const char *sym) {
+    logl(sym);
+    if (fb_a) {
+        u32 *fb = (u32 *)(u64)fb_a;
+        fill_rect(fb, 0, 0, (i64)fb_w, (i64)fb_h, 0xFF3A0E14u);
+        i64 cx = ((i64)fb_w - (i64)lf_strlen(sym) * ASCII_STEP) / 2;
+        fb_text(fb, sym, cx, (i64)fb_h / 2 - 40, 0xFFF2D8D8u, 0);
+        fb_text(fb, "DESHAB LOGIN FATAL - SYSTEM HALTED",
+                ((i64)fb_w - 36 * ASCII_STEP) / 2, (i64)fb_h / 2, 0xFFB08890u, 0);
+    }
+    for (;;) __asm__("cli; hlt");
+}
+
+/* ohMyLogo 开场：登录卡片之前显示 DEAICUP 莲花 Logo（ohMyLogo.png 内嵌） */
+#include "ohmylogo_data.c"
+
+static void draw_logo_rgba(u32 *fb, i64 x, i64 y) {
+    for (i64 r = 0; r < g_panic_logo_h; r++) {
+        for (i64 c = 0; c < g_panic_logo_w; c++) {
+            const unsigned char *px4 =
+                g_panic_logo_rgba + ((u64)r * g_panic_logo_w + (u64)c) * 4;
+            u32 a = px4[3];
+            if (a < 8) continue;
+            u32 col = 0xFF000000u | ((u32)px4[0] << 16) | ((u32)px4[1] << 8) | px4[2];
+            if (a < 250) {
+                /* 简单 alpha 混合到深蓝底 */
+                u32 bg = 0xFF020F22u;
+                u32 na = 256 - a;
+                u32 rr = (((bg >> 16) & 0xFF) * na + ((col >> 16) & 0xFF) * a) >> 8;
+                u32 gg = (((bg >> 8) & 0xFF) * na + ((col >> 8) & 0xFF) * a) >> 8;
+                u32 bb = ((bg & 0xFF) * na + (col & 0xFF) * a) >> 8;
+                col = 0xFF000000u | (rr << 16) | (gg << 8) | bb;
+            }
+            i64 xx = x + c, yy = y + r;
+            if (xx < 0 || (u64)xx >= fb_w || yy < 0 || (u64)yy >= fb_h) continue;
+            *(u32 *)((u8 *)fb + (u64)yy * fb_p + (u64)xx * 4) = col;
+        }
+    }
+}
+
+static void logo_intro_screen(u32 *fb) {
+    fill_gradient_rect(fb, 0, 0, (i64)fb_w, (i64)fb_h);
+    i64 lx = ((i64)fb_w - g_panic_logo_w) / 2;
+    i64 ly = ((i64)fb_h - g_panic_logo_h) / 2 - 30;
+    if (ly < 0) ly = 0;
+    draw_logo_rgba(fb, lx, ly);
+    fb_text(fb, "DESHAB LOGIN", ((i64)fb_w - 12 * ASCII_STEP) / 2,
+            ly + g_panic_logo_h + 16, 0xFFF0D080u, 0);
+    for (int i = 0; i < 40; i++) delay_frame();   /* ~1.3s 开场 */
+}
+
+
 static void fill_rect(u32 *fb, i64 x, i64 y, i64 w, i64 h, u32 color) {
     for (i64 r=0; r<h; r++) {
         i64 yy = y + r;
@@ -699,11 +760,9 @@ void dsk_entry(const dsk_boot_context *ctx) {
     __asm__ volatile("cli");  /* prevent IRQ1 (ps2kbd) from racing with our polling */
     logl("[login] boot");
 
-    /* 防篡改：第一时间校验 .text 段完整性。失败则拒绝继续，立即返回。 */
+    /* 防篡改：第一时间校验 .text 段完整性。失败 = 系统被篡改，严格 panic。 */
     if (!login_verify_integrity()) {
-        logl("[login] integrity check failed, refusing to continue");
+        login_fatal("LOGIN-E01-INTEGRITY-FAIL");
-        if (ctx) ((dsk_boot_context *)ctx)->reserved[2] = 0;
-        return;
     }
 
     logl("[login] calibrating TSC");
@@ -713,8 +772,7 @@ void dsk_entry(const dsk_boot_context *ctx) {
     login_mouse_init();
 
     if (!ctx || ctx->magic != 0x44534B31424F4F54ULL) {
-        logl("[login] bad context");
+        login_fatal("LOGIN-E02-BADCONTEXT");
-        return;
     }
 
     fb_a = ctx->framebuffer_address;
@@ -724,14 +782,14 @@ void dsk_entry(const dsk_boot_context *ctx) {
 
     logl("[login] framebuffer ready");
 
+    /* D 系列：登录界面之前的 ohMyLogo 开场（DEAICUP 莲花） */
+    logo_intro_screen((u32 *)(u64)fb_a);
+
     /* Get conf data from boot context (passed by DSK) */
     const u8 *conf_buf = (const u8 *)(u64)ctx->reserved[0];
     u32 conf_size = (u32)ctx->reserved[1];
     if (!conf_buf || conf_size == 0) {
-        logl("[login] no conf data, cannot login");
+        login_fatal("LOGIN-E03-NOUSERCONF");
-        /* Mark as skipped (reserved[2]=0) and return */
-        ((dsk_boot_context *)ctx)->reserved[2] = 0;
-        return;
     }
     logl("[login] conf data received");
 
@@ -750,13 +808,13 @@ void dsk_entry(const dsk_boot_context *ctx) {
             g_has_user = 1;
             logl("[login] username found");
         } else {
-            logl("[login] username not found in conf");
+            login_fatal("LOGIN-E04-NO-USERNAME");
         }
         if (conf_get_value(conf_buf, conf_size, "passwordSha256", g_password_hash, sizeof(g_password_hash)) == 0) {
             g_has_hash = 1;
             logl("[login] password hash found");
         } else {
-            logl("[login] passwordSha256 not found in conf");
+            login_fatal("LOGIN-E05-NO-PASSWORD-HASH");
         }
     } else {
         logl("[login] conf appears encrypted, will verify by password decryption");

CODE/login/patch_login_hash.ps1

@@ -0,0 +1,57 @@
+# patch_login_hash.ps1 — login.elf .text 防篡改哈希补丁
+# 用法: powershell -File patch_login_hash.ps1 <login.elf>
+# 计算 .text 段的 SHA256，写入 .hashseg 段（__expected_hash，32 字节）。
+param([Parameter(Mandatory=$true)][string]$ElfPath)
+
+if (-not (Test-Path $ElfPath)) { Write-Error "not found: $ElfPath"; exit 1 }
+
+$bytes = [System.IO.File]::ReadAllBytes($ElfPath)
+
+# ELF64 header: e_shoff @ 0x28 (u64), e_shentsize @ 0x3A (u16), e_shnum @ 0x3C (u16)
+function U64($b, $o) { [UInt64]$b[$o] -bor ([UInt64]$b[$o+1] -shl 8) -bor ([UInt64]$b[$o+2] -shl 16) -bor ([UInt64]$b[$o+3] -shl 24) -bor ([UInt64]$b[$o+4] -shl 32) -bor ([UInt64]$b[$o+5] -shl 40) -bor ([UInt64]$b[$o+6] -shl 48) -bor ([UInt64]$b[$o+7] -shl 56) }
+function U16($b, $o) { [UInt32]$b[$o] -bor ([UInt32]$b[$o+1] -shl 8) }
+function U32($b, $o) { [UInt32]$b[$o] -bor ([UInt32]$b[$o+1] -shl 8) -bor ([UInt32]$b[$o+2] -shl 16) -bor ([UInt32]$b[$o+3] -shl 24) }
+
+$shoff = U64 $bytes 0x28
+$shentsize = U16 $bytes 0x3A
+$shnum = U16 $bytes 0x3C
+
+$textOff = 0; $textSize = 0; $hashOff = 0
+for ($i = 0; $i -lt $shnum; $i++) {
+    $sh = $shoff + $i * $shentsize
+    $nameIdx = U32 $bytes $sh
+    $shType = U32 $bytes ($sh + 4)
+    $shOffset = U64 $bytes ($sh + 24)
+    $shSize = U64 $bytes ($sh + 32)
+    # sh_name indexes .shstrtab; resolve names via that section lazily
+    if ($shType -eq 3 -and -not $shstr) { $shstrOff = $shOffset; $shstrSize = $shSize; $shstr = $bytes[$shstrOff..($shstrOff+$shstrSize-1)] }
+}
+
+function Get-Name([int]$idx) {
+    $end = $idx
+    while ($shstr[$end] -ne 0) { $end++ }
+    [System.Text.Encoding]::ASCII.GetString($shstr, $idx, $end - $idx)
+}
+
+for ($i = 0; $i -lt $shnum; $i++) {
+    $sh = $shoff + $i * $shentsize
+    $nameIdx = U32 $bytes $sh
+    $shType = U32 $bytes ($sh + 4)
+    $shOffset = U64 $bytes ($sh + 24)
+    $shSize = U64 $bytes ($sh + 32)
+    $nm = Get-Name $nameIdx
+    if ($nm -eq '.text' -and $shType -eq 1) { $textOff = $shOffset; $textSize = $shSize }
+    if ($nm -eq '.hashseg') { $hashOff = $shOffset }
+}
+
+if ($textOff -eq 0 -or $hashOff -eq 0) { Write-Error 'section .text/.hashseg not found'; exit 1 }
+
+$sha = [System.Security.Cryptography.SHA256]::Create()
+$textBytes = New-Object byte[] $textSize
+[Array]::Copy($bytes, [int]$textOff, $textBytes, 0, $textSize)
+$hash = $sha.ComputeHash($textBytes)
+
+[Array]::Copy($hash, 0, $bytes, [int]$hashOff, 32)
+[System.IO.File]::WriteAllBytes($ElfPath, $bytes)
+Write-Host "[patch_login_hash] .text($textSize B) SHA256 -> .hashseg @ $hashOff : $(($hash[0..3] | ForEach-Object { $_.ToString('x2') }) -join '')..."
+exit 0

SYSTEM/system/deshab64/FUCK

@@ -1,4 +1,4 @@
-# Deshab Kernel Configuration — dev 变体（build/configs/dev/FUCK）
+# Deshab Kernel Configuration — dev 变体（build/configs/dev/FUCK）
 # build.ps1 -Variant dev 打包前注入 SYSTEM/system/deshab64/FUCK
 # 开发者模式：selftest 开、dev_mode 自动跑 shell.elf 测试、日志持久化、跳过向导直达桌面
 
@@ -10,7 +10,7 @@ xj380_guest=0
 selftest=1
 # F1 验证钩子: 1=启动自检后触发莲花崩溃屏（演示/回归用，日常保持 0）
 panic_test=0
-dev_mode=1
+dev_mode=0
 la57_guard=0
 mcfg_check=0
 max_phys_addr_bits=0
@@ -62,10 +62,10 @@ demo_fault=0
 watchdog_enabled=1
 
 [dsk]
-show_logo=0
+show_logo=1
-skip_login=1
+skip_login=0
-# F5: dev 直达桌面（跳过向导与登录）
+# F5: dev 也走完整流程（Logo→向导→登录→桌面）；skip_firstinit=1 可直达桌面
-skip_firstinit=1
+skip_firstinit=0
 mouse_init=1
 netman=1
 session=native
@@ -103,3 +103,7 @@ pe_dll_search=1
 
 
 
+
+
+
+

SYSTEM/system/user/use/firstInit.txt

@@ -1,2 +1,2 @@
-1
+0
-1
+0

build.ps1

@@ -977,15 +977,20 @@ if ($Variant -eq 'both') {
 # Sidecar AHCI test disk only. Not one of the ISO/*.img system images.
 Write-Host '[build] Rebuilding SATA FAT32 sidecar (.build_tmp/sata_fat32_dsk.img, not ISO/*.img)...'
 $BuildTmp = Join-Path $Root '.build_tmp'
-$MkFat32Ps = Join-Path $BuildTmp 'mkfat32.ps1'
+$SidecarSh = Join-Path $Root 'CODE\linux\make_sata_sidecar.sh'
-if (Test-Path $MkFat32Ps) {
+$SidecarImg = Join-Path $BuildTmp 'sata_fat32_dsk.img'
-    & powershell -ExecutionPolicy Bypass -File $MkFat32Ps
+if ((Test-Path $SidecarSh) -and (Get-Command wsl -ErrorAction SilentlyContinue)) {
+    $wslSh = ConvertTo-WslUnixPath $SidecarSh
+    $wslSys = ConvertTo-WslUnixPath $SystemDir
+    $wslImg = ConvertTo-WslUnixPath $SidecarImg
+    & wsl -u root -- bash $wslSh $wslSys $wslImg
     if ($LASTEXITCODE -ne 0) {
-        Write-Host "[build] WARNING: mkfat32.ps1 exited with $LASTEXITCODE"
+        Write-Host "[build] WARNING: sidecar rebuild failed ($LASTEXITCODE), keeping old image"
+    } else {
+        Write-Host "[build] SATA IMG: $SidecarImg"
     }
-    Write-Host "[build] SATA IMG: $(Join-Path $BuildTmp 'sata_fat32_dsk.img')"
 } else {
-    Write-Host '[build] WARNING: mkfat32.ps1 not found, SATA image not rebuilt'
+    Write-Host '[build] WARNING: make_sata_sidecar.sh/WSL unavailable, SATA image not rebuilt'
 }
 
 # NVMe 测试盘镜像 (64MB, LBA0 带 DESHABNVME0 签名, 用于验证 NVMe block 数据路径)

build/configs/dev/FUCK

@@ -1,4 +1,4 @@
-# Deshab Kernel Configuration — dev 变体（build/configs/dev/FUCK）
+# Deshab Kernel Configuration — dev 变体（build/configs/dev/FUCK）
 # build.ps1 -Variant dev 打包前注入 SYSTEM/system/deshab64/FUCK
 # 开发者模式：selftest 开、dev_mode 自动跑 shell.elf 测试、日志持久化、跳过向导直达桌面
 
@@ -10,7 +10,7 @@ xj380_guest=0
 selftest=1
 # F1 验证钩子: 1=启动自检后触发莲花崩溃屏（演示/回归用，日常保持 0）
 panic_test=0
-dev_mode=1
+dev_mode=0
 la57_guard=0
 mcfg_check=0
 max_phys_addr_bits=0
@@ -62,10 +62,10 @@ demo_fault=0
 watchdog_enabled=1
 
 [dsk]
-show_logo=0
+show_logo=1
-skip_login=1
+skip_login=0
-# F5: dev 直达桌面（跳过向导与登录）
+# F5: dev 也走完整流程（Logo→向导→登录→桌面）；skip_firstinit=1 可直达桌面
-skip_firstinit=1
+skip_firstinit=0
 mouse_init=1
 netman=1
 session=native
@@ -103,3 +103,7 @@ pe_dll_search=1
 
 
 
+
+
+
+

build/configs/dev/firstInit.txt

@@ -1,2 +1,2 @@
-1
+0
-1
+0

docs/STATUS.md

@@ -55,9 +55,10 @@
 | FirstInit 向导 | 🔶 | 输入+SHA256+写盘闭环；按键崩溃未复现（B6） | `.build_tmp/qemu_serial_b6.log` |
 | 可跳过 FirstInit（F5） | ✅ | `[dsk] skip_firstinit=1` 直达 desktop，跳过向导与登录 | `.build_tmp/qemu_serial_f1f4f5.log` |
 | mouseInit（PS/2 鼠标） | ✅ | IRQ12 + 包解码 + 光标（M1） | `.build_tmp/qemu_serial_mouse.log` |
-| desktop.elf | ✅ | 三页面+窗口+任务栏+双缓冲 | — |
+| desktop.elf | ✅ | 三页面+窗口+任务栏+双缓冲；打字机效果已删（整屏一次绘制）；DSK-E01 fatal 插桩 | — |
+| SATA 边车镜像 | ✅ | `make_sata_sidecar.sh` 每次构建自动重建（旧 mkfat32.ps1 缺失导致 login.elf 长期缺盘的静默降级已根治） | build.ps1 |
 | shell.elf | ✅ | 25+ 命令（ls/cat/cp/mv/run/probe/test/pci…） | — |
-| login.elf | ✅ | USER.CONF + skip_login | — |
+| login.elf | ✅ | USER.CONF + skip_login；ohMyLogo 开场屏 + 严格错误插桩（LOGIN-E01..E05 fatal，零降级） | `.build_tmp/login4.png` + qemu_serial_login4.log |
 | PE/EXE 兼容层 | ✅ | PE32+ 原生 / PE32 走 x86emu32 | — |
 | Linux 兼容层 | 🔶 | VMM+park-and-resume；VMX 实机验证待 VT-x/KVM | — |
 | Pacman | ⬜ | 五阶段方案 | — |