Deshab-OS/SYSTEM/limine/limine.conf

timeout: 0
serial: yes
verbose: yes

/UTSM boot
    protocol: limine
    kernel_path: boot():/boot/utsm.elf
    module_path: boot():/driver/manifest.json
    module_cmdline: dkm:manifest

    module_path: boot():/driver/platform/timer.drv
    module_cmdline: dkm:timer
    module_path: boot():/driver/platform/apic.drv
    module_cmdline: dkm:apic
    module_path: boot():/driver/platform/acpi.drv
    module_cmdline: dkm:acpi
    module_path: boot():/driver/bus/pci.drv
    module_cmdline: dkm:pci
    module_path: boot():/driver/console/console_fb.drv
    module_cmdline: dkm:console_fb
    module_path: boot():/driver/block/ahci.drv
    module_cmdline: dkm:ahci
    module_path: boot():/driver/block/nvme.drv
    module_cmdline: dkm:nvme
    module_path: boot():/driver/block/xhci.drv
    module_cmdline: dkm:xhci
    module_path: boot():/driver/fs/bootfs.drv
    module_cmdline: dkm:bootfs
    module_path: boot():/driver/fs/vfs.drv
    module_cmdline: dkm:vfs
    module_path: boot():/driver/fs/fat32.drv
    module_cmdline: dkm:fat32
    module_path: boot():/driver/fs/devfs.drv
    module_cmdline: dkm:devfs
    module_path: boot():/driver/net/e1000.drv
    module_cmdline: dkm:e1000
    module_path: boot():/driver/net/virtio_net.drv
    module_cmdline: dkm:virtio_net
    module_path: boot():/driver/net/ath9k.drv
    module_cmdline: dkm:ath9k
    module_path: boot():/driver/input/ps2kbd.drv
    module_cmdline: dkm:ps2kbd
    module_path: boot():/system/deshab64/deshab.elf
    module_cmdline: dsk:main
    module_path: boot():/driver/test.fat32
    module_cmdline: dkm:test_fat32

    # FUCK — 内核启动配置文件（INI 分区格式）
    # UTSM 通过此 boot module 读取配置（cmdline="fuck:config")
    # DSK 通过 FAT32 子目录遍历读取（路径 /system/deshab64/FUCK）
    module_path: boot():/system/deshab64/FUCK
    module_cmdline: fuck:config

    # Linux 6.6 LTS guest kernel (UTSM+Linux dual-kernel Linux compat layer)
    # Uncomment after building Linux via CODE/linux/build.sh (requires WSL/Linux).
    #
    # Boot flow with these modules:
    #   1. Limine loads utsm.elf + all .drv modules + bzImage + initrd
    #   2. UTSM boots, init VMM/EPT, self-test
    #   3. UTSM linux_loader_init() finds bzImage module, parses + maps guest
    #   4. UTSM ipc_shm_init() allocates 1MB IPC shared memory (EPT-mapped)
    #   5. UTSM linux_launch() → vmlaunch → Linux boots → init starts daemon
    #   6. Daemon sends EXEC_READY, then ioctl(PARK) → HLT → VM-Exit → park
    #   7. UTSM linux_compat_init() marks Linux compat layer ready
    #   8. UTSM loads DSK (deshab.elf) → shell.elf → `linux <prog>` command
    #      invokes linux_compat_service->exec() → vmresume → daemon runs prog
    #
    # Linux 兼容层模块（需先通过 WSL 运行 CODE/linux/build.sh 构建产物）
    # build.sh 成功后会自动取消下面 4 行注释；若未构建 Linux 内核请保持注释状态
    # module_path: boot():/boot/linux-bzImage
    # module_cmdline: linux:bzImage
    # module_path: boot():/boot/linux-initrd.img
    # module_cmdline: linux:initrd
    # Arch Linux rootfs (ext4) — exposed to Linux guest as virtio-blk /dev/vdb
    # via memory-backed virtio-mmio backend (GPA 0xF4002000, IRQ7).
    # initramfs init mounts this and switch_root's into Arch /sbin/init.
    # build_arch_rootfs.sh produces this file; uncomment after building.
    #module_path: boot():/boot/linux-rootfs.img
    #module_cmdline: linux:rootfs
    # VSCode Phase 4: 持久 rw 卷 (ext4) — virtio-blk slot6 可写后端
    # (GPA 0xF4006000, IRQ11) 暴露为 /dev/vdc，用作 overlayfs upperdir
    # 与 VSCode 数据卷。由 CODE/linux/build_extra_rootfs.sh 生成。
    # 文件不存在时 Limine 会报 module 加载失败 —— 构建脚本未生成该文件时
    # 请保持下面两行注释（后端对缺失 module 安全降级）。
    #module_path: boot():/boot/linux-extra-rootfs.img
    #module_cmdline: linux:extra_rootfs

    # OpenXJ380 第三内核（三内核架构路线 B：XJ380 作为第二 guest）。
    # 把 OpenXJ380 构建产物 out/kernel.krl 复制为 SYSTEM/boot/xj380.krl 后
    # 取消下面两行注释；UTSM 的 xj380_loader 会把它作为 VM guest 加载。
    # 文件不存在时 Limine 会报 module 加载失败 —— 未构建前保持注释状态。
    #module_path: boot():/boot/xj380.krl
    #module_cmdline: xj380:kernel

    # VSCode Phase 5: VSCode tarball（官方 VSCode-linux-x64 .tar.gz）—
    # 由 lxc_vscode_install() 流式推入 guest 并解包到 /opt/vscode
    # （overlay 持久化，二次启动自动跳过）。把 tarball 放到
    # SYSTEM/boot/linux-vscode.tar.gz 后取消下面两行注释。
    #module_path: boot():/boot/linux-vscode.tar.gz
    #module_cmdline: linux:vscode